The mesh has large
steel, good elasticity, uniform and accurate spacing and high welding point
strength through its grid size, rebar specifications and quality are all strictly
controlled. The omission of the artificial help net is avoided in bundling
errors and cut corners occur thus its greatly improving the quality of the
project with improved seismic and crack resistance. The longitudinal and
transverse bars of the concrete reinforcing mesh form a network structure, so
it has good adhesion and anchorage with concrete and the load is evenly
distributed. The actual tests in laying of welded steel mesh on roads can
reduce the occurrence of cracks compared to artificial netting and by reducing
the amount of reinforcing steel. The principle of equal strength replacement
and considering comprehensive factors is the use of reinforcing steel mesh can
save the amount of reinforcing steel used and this significantly improves the
seismic crack resistance. The mesh reinforcement Brisbane concrete structures for bridge
reinforcement steel mesh can improve the rigidity and the reinforcement mesh
needs to be processed after being transported to the construction site so there
is no loss.
Speed up the
construction progress in using of mesh reinforcement Brisbane can make the project
construction faster that can save of man-hours is greatly speed up the
construction schedule and shorten the construction cycle. A lot of man-hours
for lowering the reinforcing bar device less than the binding net with a
relatively tight reinforcement distance, the longitudinal bars and cross bars
of the reinforcement mesh form. A net-like structure to bond and anchor
together which is beneficial to avoid occurrence and development of concrete
cracks and for the welded mesh of road, floor, and floor equipment. It can
reduce cracks on the concrete surface particularly suitable for large-area
concrete projects the mesh size of the welded mesh is very regular. It is much
larger than that of hand-stitched mesh, the mesh has large rigidity and good
elasticity and the steel bar is not easily bent, deformed and slipped when the
concrete is irrigated. The thickness of the concrete protective layer is easy
to control and uniform which obviously improves the quality of mesh reinforcement Brisbane concrete engineering.
The planned strength
of welded wire reinforcement is higher than that of a grade I rebar as long as
the mesh reinforcement is laid as required and the concrete can be poured in eliminating
the need for on-site cutting of the reinforcement. Placing them one by one and
tying up is still possible after considering some structural requirements that
saves the reinforcing steel. The processing cost of the loose steel
reinforcement with a diameter of the material cost and inductive consideration
can reduce the cost of the reinforcing steel project for welded steel mesh used
in construction. It is usually used in the construction of concrete slabs such
as roads, vaults and other curved structures as a bonding fabric for gunstone
to improvement of the project quality for mesh reinforcement. The manufactured
by fully automatic and intelligent production line under the strict quality
control of the factory is compared with traditional lashing steel bars for the
cost, time and labor savings of welding wire fabric reinforcement provide an
advantage.
Comments
Post a Comment